Do rubber compounding masters often get frustrated by a problem: uncured rubber sheets, whether stored or processed, stick together if not careful, and hard breakage can tear the sheets, delaying production progress and wasting raw materials?
Don't worry about film adhesion anymore! Today, I would like to recommend a "film anti-sticking tool" - LongGreen1210 Powder Rubber Release Agent. It is gray white to light yellow, which may not look eye-catching, but this professional product can easily solve the problem of rubber film adhesion and make the mixing process smooth and efficient!
1、 First Understand: The "Anti-Sticking Secret" of This Powder Rubber Release Agent
LongGreen1210 is not an ordinary powder, it is a professional product scientifically formulated from fine inorganic fillers and surfactants. As a high-performance Powder Rubber Release Agent, its core function is to provide a layer of protective clothing for uncured rubber and mixed rubber films. It works at the source to prevent films from sticking to each other during storage and processing, ensuring that each film remains in good condition and eliminating the need to spend time dealing with adhesion issues in subsequent processes.
2、 4 Core Advantages to Solve Film Processing Pain Points
Have you used many release agents that either have unstable suspension and easy precipitation, or have a lot of residual dust, or affect the subsequent performance of rubber? LongGreen1210, this excellent Powder Rubber Release Agent, directly solves these problems, and each advantage hits the production demand:
✅ Super Stable Suspension – No Fear of Stratification or Precipitation
After many release agents are mixed into a water dispersion, they will layer after a while, and thick sediment will accumulate at the bottom. But LongGreen1210, as a high-quality product, is different! When it is made into a water dispersion, even if the dilution concentration is very low, there will be no stratification or precipitation in a short period of time, and the stability is fully enhanced. When the film is immersed and cooled, it can effectively avoid the formation of hard precipitates from film residue and bottom inorganic fillers, saving the trouble of cleaning precipitates and making the film surface more uniform.
✅ Forms Elastic Isolation Film – Anti-Sticking and Dust-Free
Some release agents either have poor anti-sticking effect or shed dust after drying, polluting the workshop environment. But LongGreen1210 performs exceptionally well here! After spraying this product, a layer of elastic isolation film will be formed on the surface of the film. This film not only firmly locks the film to prevent adhesion but also does not generate dust, keeping the workshop environment clean and eliminating worries about dust affecting rubber quality.
✅ Integrates into Rubber Easily – No Impact on Physical and Chemical Properties
The biggest concern for many users is whether the release agent residue will affect the subsequent processing of rubber. But with LongGreen1210 Powder Rubber Release Agent, you can put this worry aside! It can dissolve well into the rubber during the subsequent mixing and vulcanization process. Unlike inferior release agents, this product does not affect the physical and chemical properties of the rubber – the required strength and elasticity remain intact, ensuring stable quality of the rubber products you produce.
✅ Flexible Operation – Adaptable to Different Scenarios
A good Powder Rubber Release Agent should be adaptable to various production conditions, and LongGreen1210 meets this requirement perfectly. Whether it's high temperatures in summer or when dealing with high-viscosity rubber, you can adjust the usage of this product to adapt. It has super strong adaptability, so you don't need to switch to other release agents due to changes in rubber properties or seasons – this single product can handle multiple scenarios.
3、 Super Simple Operation – 3 Steps to Use
Worried that the new reagent is complicated to operate and that workers can't learn it quickly? LongGreen1210 is designed with "convenience" in mind, allowing even beginners to get started quickly:
Prepare the Dispersion: Pour LongGreen1210 Powder Rubber Release Agent into the preparation tank, gradually add warm water, and stir the dispersion for at least 30 minutes. If you want to speed up the dispersion, using hot water is more effective – saving time and effort for preparation.
Timely Add Fresh Dispersion: Add the fresh dispersion from the mixing tank to the immersion tank on time. Ensure that the liquid level of the dispersion in the immersion tank reaches more than 2/3 of the total volume – do not let too little solution affect the film immersion effect.
Immerse Films: Place the films to be processed into the immersion tank, allowing the films to be evenly coated with the dispersion. After that, you can store and process the films according to normal procedures.
4、 Dosage – Adjust Appropriately for Better Results
The recommended concentration of LongGreen1210 Powder Rubber Release Agent is 3.0 ± 1%, but this is not fixed – it should be adjusted according to actual conditions:
In summer, when the temperature is high, or when dealing with high-viscosity rubber, it is recommended to use a higher concentration to ensure the anti-sticking effect.
If you are unsure about the specific concentration to use, feel free to consult the technical service department. Professional personnel will provide accurate advice based on your production scenario, avoiding waste and ensuring effectiveness.
5、 Who Can Use It? Exclusive for Rubber Mixing Processes
LongGreen1210 Powder Rubber Release Agent is mainly used in the rubber mixing process. It is specially designed to solve the adhesion problem of uncured rubber and mixed rubber films during storage and processing. Whether you are producing ordinary rubber products or products with high requirements for rubber performance, this product can adapt perfectly. It makes the mixing process smoother, reduces raw material waste, and improves production efficiency – a must-have for rubber mixing workshops.
If you are troubled by film adhesion issues and want to find a stable, worry-free, and non-performance-impacting release agent, then LongGreen1210 Powder Rubber Release Agent is definitely worth a try!
(If you have any questions about this product, such as wanting to know the specific type of rubber it is suitable for or applying for sample testing, you can contact us, and our technical team will answer you as soon as possible!)
