Introduction of Inside Tyre Coating with Fillers:
Inside tyre coating with fillers is a water-based tyre liner coating that allows the liner to slide well in the green tyre and has very effective demoulding properties after curing. In addition, inside tyre coating with fillers has good air release properties. After curing, the inside of the tyre is clean and smooth and the liner splicing is not affected because the active ingredients do not have the negative separation effect that usually occurs when using ordinary silicone oils. Inside tyre coating with fillers has a short drying time and low consumption, making it very economical.
Features of Internal Filler Coatings:
Internal filler coatings combine the advantages of tire inner coatings with fillers, high-efficiency rubber release agents and internal filler coatings to significantly reduce tire wear rates. When applied to the inside of the tire blank, internal filler coatings ensure that the liner slides smoothly and seamlessly into the green tire, allowing for easy and precise fitting. The unique formula of internal filler coatings has excellent venting properties, which can effectively expel trapped air during the curing process. Unlike traditional silicone oil-based products, the active ingredients of internal filler coatings do not produce negative separation effects, ensuring that the joints are not affected and the structural integrity of the tire remains intact. Internal filler coatings have very short drying times, which can significantly shorten manufacturing cycles, improve production efficiency, and help customers complete production tasks more quickly, thereby improving overall production capabilities.
Application of Water-based Tire Interior Coating Solution:
1. Water-based tire interior coating is mainly used for inner coating treatment of tires, especially for various types of tires, including passenger tires, truck tires and special tires. Water-based tire interior coating solution can effectively ensure smooth demolding of tires during the green tire process, ensure smooth and residue-free inner surface, and avoid adhesion between tire and mold.
2. Water-based tire interior coating is suitable for various tire manufacturing processes, and can be used for key links such as mold demolding, filling, and molding. It reduces loss and waste in the manufacturing process while ensuring high-quality production.
3. Water-based tire interior coating is recommended to be sprayed using an air atomization spray system, suitable for 1.0 to 1.2 mm nozzles. After spraying, the product can be evenly coated, providing excellent coating quality, ensuring that there will be no uneven coating problems during the production process.
Note:
1. Inside tyre coating with fillers should be stirred thoroughly before use to ensure that the fillers and ingredients in the coating are evenly distributed.
2. It is recommended to use an air atomizing spray system for Inside tyre coating with fillers, and the nozzle size should be 1.0 to 1.2 mm.
3. Inside tyre coating with fillers should be stored in a cool, dry environment and avoid high or low temperature storage. The optimal storage temperature is 5°C to 35°C, and the product should be kept away from freezing. Make sure the container is sealed to prevent moisture evaporation and external contamination.
4. Inside tyre coating with fillers is non-hazardous according to transportation regulations. As long as it is used correctly according to the instructions, it is safe and will not cause harm to health or the environment. However, it is still necessary to follow the general operating safety specifications when using it, avoid direct contact with skin and eyes, and it is recommended to wear appropriate protective equipment when using it.
5. When using Inside tyre coating with fillers, the dosage should be controlled to avoid excessive use.
Why Choose Us：
1. We have many years of experience in the research and development and production of rubber antioxidants. The company is equipped with a first-class technical team and R&D personnel, and has its own product processing plant. Our products are exported to overseas and are widely praised.
2. All products have multiple test reports such as MSDS, TDS, COA, etc., and can be customized according to the actual needs of customers.
3. In terms of after-sales service, we provide customers with one-stop comprehensive after-sales protection, including logistics tracking, product consultation and technical problem solving, to ensure that the product can be put into use quickly and relieve you of worries.
