Tire Curing Bladder Protective Agent is a functional substance between the bladder and the tire during tire vulcanization, which plays the role of isolation, lubrication and demolding. The tire bladder needs to be heated and vulcanized by the vulcanizer during the production process. The metal mold is used to form the pattern on the outer surface of the tire, and the telescopic bladder is used to form the inner surface of the tire.
From the contact surface between the metal mold and the tire, it can be seen that Tire Curing Bladder Protective Agent is very important. If there is no isolation agent, the rubber of the tire airtight layer will stick to the metal mold during vulcanization. Generally, the isolation agent is sprayed on the surface of the metal mold. Some customers also require it to be sprayed on the inside of the tire. Different processes have different operating methods. The production of a tire requires many steps to complete. Vulcanization molding is a very important link. Any slight mistake will cause losses. An efficient Tire Curing Bladder Protective Agent can provide good vulcanization conditions. Reasonable use can extend the storage life of the vulcanization bladder, reduce replacement costs, and optimize the production process.
How to Use Tire Curing Bladder Protective Agent:
1. Cleaning: Before using the new bladder, it needs to be thoroughly cleaned with xylene or petroleum solvent to ensure the best bonding effect.
2. Brushing: It is recommended to brush twice, and then brush the second time after the first coat is completely dry.
3. Drying: Coating must be dried for at least 12 hours to form the best protective film.
4. Preheating: After installing it on the vulcanizer, preheat it at above 80℃ for 15 minutes.
5. Baking (optional): Manufacturers with baking equipment can use 180℃ baking for 1 hour to enhance the protective effect.
Compared with other release agents on the market, our Tire Curing Bladder Protective Agent is more cost-effective and can achieve semi-permanent demolding. The bladder release agent is suitable for a variety of tire curing bladder processes and can be used in conjunction with tire inner rubber or release agent to further optimize the vulcanization process. Each product is carefully labeled and classified for quick retrieval and accurate delivery. We are also equipped with advanced logistics equipment and an efficient management team to ensure timely response to customer needs, smooth supply chain, and on-time delivery of products. If you are also considering a tire bladder protective agent, you may wish to contact us!
