Water-Based Tire Interior Coating is used for spraying the inner liner of the green tire. It has good slipperiness, which allows the tire curing bladder (film) to easily fit the inner wall of the green tire during the shaping process of the tire curing cycle. The high lubricity of this link helps the curing bladder fit the inner wall contour of the tire and maintain the tire centering.
This type of spray also helps to eliminate residual bubbles in the tire. Using tire interior spray is very important for minimizing vulcanization defects and improving tire uniformity. At the end of the curing cycle, tire interior spray helps to remove the tire product from the curing bladder.
When using inner tube coatings containing fillers, the amount should be controlled to avoid excessive use. Tire inner tube coatings should be stored in a cool and dry environment, avoiding high or low temperature storage. The optimal storage temperature is 5°C to 35°C, and avoid freezing. Make sure the container is sealed to prevent water evaporation and external contamination. When using, it is necessary to follow the general operating safety specifications, avoid direct contact with the skin and eyes, and it is recommended to wear appropriate protective equipment.
Shenyang LongGreen Water-Based Tire Interior Coating 7202 is used for the inner coating treatment of tires, especially for various types of tires, including passenger tires, truck tires and special tires. It can effectively ensure that the tire is demolded smoothly during the tire production process, the surface is smooth and free of residue, and the tire is prevented from sticking to the mold. Our inner coating liquid is suitable for various tire manufacturing processes and can be used for key links such as demolding, filling, and molding. While ensuring high-quality production, it reduces losses and waste in the manufacturing process. Water-Based Tire Interior Coating recommends using an air atomization spray system for spraying, suitable for 1.0 to 1.2 mm nozzles. After spraying, the product coating is uniform and the coating quality is excellent. There will be no problem of uneven coating during the production process.
After the spray agent is used reasonably in the vulcanization process, the probability of defects such as lack of glue, cracks, and bright scars in the finished product can be effectively prevented and reduced, and the safety hazards of flammable and explosive rubber solvents can be eliminated, thereby improving the appearance quality of the company's finished products and enhancing the market competitiveness of the company's products. If you are considering a Water-Based Tire Interior Coating, please contact us.
