If you’ve run a tire or rubber parts factory for any length of time, you’ll know how annoying powder release agents can be. Fine dust floats everywhere during feeding, messes up equipment, release agents, irritates workers’ throats, and sometimes leaves hard deposits on your uncured rubber sheets. We built LongGreen 8093 to fix all these daily headaches, and we’ve seen real improvements in dozens of domestic rubber production lines over the years.
This product is a compound fatty acid salt blend shaped into solid blocks, pale white to light yellow when you unpack the bags. Unlike loose powder types, release agents, there’s zero flying dust when you add it to mixing tanks. That alone cuts down daily cleaning work around dipping pools and presses, and makes the whole workshop a much healthier space for operators.
Using it is straightforward, no complicated setup required, release agents. You just fill your tank with water heated above 65°C, then toss the blocks in slowly. It dissolves fully without lumps or leftover sediment. The dilution ratio hits above 1:20, which stretches every bag much further than many cheaper alternatives on the market. If you want stronger anti-sticking results, you can even mix it with our powder release agents without any compatibility issues.
Most factories run this agent in the cooling dip tanks right after extruding uncured rubber sheets, release agents. Once the wet rubber passes through the solution and air-dries fully, a thin, stretchy uniform film coats every sheet surface. This barrier stops stacked green rubber pieces from sticking tight together during storage or transport. No more tearing, no wasted semi-finished rubber scraps, and fewer production stops to separate stuck sheets manually.
A big plus we hear from clients is its stable performance during non-stop shift work. Long-term continuous use won’t create thick sediment or hard chunks stuck on machine walls or rubber surfaces, release agents. That means no weird agglomeration defects popping up in later vulcanization, trimming or bonding processes. It contains no silicone that migrates, so follow-up spraying and adhesive treatments won’t be disrupted at all.
Its main application covers tire manufacturing, all kinds of rubber semi-finished stock, sealing gaskets and extruded industrial rubber goods, release agents. The core makeup is composite fatty acid salt with fatty acid content no less than 20%, and diluted liquid reads PH 9.5–12.5 at a 1:99 water mix.
For storage and shipping, we pack it in 25kg woven bags, stackable on 1000kg pallets or one-ton bulk packs. Sealed and kept dry, the blocks stay usable for up to 12 months. Every batch’s technical data is tested in our lab, but note that actual results shift based on your unique rubber formula, water quality and production line settings. Reach out to our technical team if you need tailored usage doses or on-site trial support.
Lots of plant managers switch to LongGreen 8093 for three simple reasons: cleaner workshop environments, lower long-term auxiliary material costs, and fewer defective rubber semi-finished products. If you’re still struggling with messy powder release agents or frequent sheet adhesion problems, this block-type solution is worth a trial run.
Contact Shenyang LongGreen Science and Technology Co., Ltd. for free samples or technical consultation. Our hotline is +086-024-25361668, factory address No.108-2 Shenliao Road, Shenyang, China.
